Large stock, please search or inquiry

Fenoux Electric Co., Ltd.
Home / Products / Honeywell / 51405043-175 Honeywell Power module Brand new

51405043-175 Honeywell Power module Brand new

Because the maximum transmitter output level is -7 dB, and the maximum receiver input level is -10 dB, the receiver may be overdriven on a short link and may require a 3 dB attenuator. Connector allowances for the transmitter and receiver are included in the above power declaration.

INQUIRE NOW

Products Name: 51405043-175 Honeywell Power module Brand new

PRODUCT DESCRIPTION

Brand:   Honeywell  

Model number:51405043-175

Colour:new                  

Warranty: 12 months

Lead Time:3-day working day   

Country of origin: USA Price: Please contact us         

Product weight:0.5kg

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service Professional Sales provides 24 hours /7 days online service

51405043-175   Honeywell   Power module Brand new 

Description:

NOTE

Only 1-5V sensor type will be supported when HART is enabled.

10.11.11 Comparing parameters between Series C and PMIO

HPVCHAR, which is used in PM I/O, is not used Series C I/O. PVCHAR are used instead, and only

valid enumerations (depending on the settings for HENABLE and IOM TYPE) are displayed to you.

Some HART parameters are only valid for HART Protocol Version 6. Series C IOMs support HART

6.0 and later version device features such as Extended Device Status, Configuration Change

Counter, Variable Status and Classification Codes. The current release of Series C I/O supports

these HART 6.0 and later version device parameters:

Parameter Tab Description

HMAXDEVVARS Indicates the last device variable code supported by the device.

Information can be used by the host applications.

HNCFGCHG Configuration change counter is a counter maintained by HART 6.0

and later version device which is incremented every time configuration

is changed. This is improvement over the single 'configuration

changed bit' in previous HART releases

HNSMMINPRE Minimum number of preamble bytes to be sent with the response from

device to the IOM. Series C IOMs take advantage of this configuration if

supported by the device to minimize the bytes sent from device in

response messages.

HDYNCC Variables Dynamic / device variable classification code

HDYNST Variables Dynamic / device variable classification code

HSLOTCC Variables Dynamic / device variable classification code

HSLOTST Variables Dynamic / device variable classification code

10.11.12 Parameter values not copied during Block Copy

IOP and CHANNUM are the only configuration parameter values not copied during a Block Copy

operation.

10.12 Defining AI Channel Blocks

The AI channel block represents a single analog input point on either an AI-HART or AI-LLMUX or

AI-LLAI I/O Module. The type of analog input IOM needed is based on the:

l type of field sensor that is providing the input to the channel

l PV characterization options you select (as listed in the table in Determining PV

Characterization)


image.png

Shipping Port: China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Related products:

TC-IXL062

TC-KIOL02

TCM4351A

TCM4351B

TC-OAH061

TC-ODD32

TC-ODX161

TCP202A

TC-RPFM01

TCSECE300R2

TCSEK3MR10

TC-TG-F1C3

TC-XXXXX2