In virtually all configurations, the C300 controller and Series C I/O provides useful, maintainable process equipment connections in a smaller footprint than existing competitors and Honeywell equivalent products. Installing Series C I/O modules contributes to overall total installed cost savings.
INQUIRE NOW
Products Name: CC-PCNT01 Honeywell Power module Brand new
PRODUCT DESCRIPTION
Brand: Honeywell
Model number:CC-PCNT01
Colour:new
Warranty: 12 months
Lead Time:3-day working day
Country of origin: USA Price: Please contact us
Product weight:0.5kg
Shipping Port: China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service : Professional Sales provides 24 hours /7 days online service
CC-PCNT01 Honeywell Power module Brand new
Description:
NOTE
Only 1-5V sensor type will be supported when HART is enabled.
10.11.11 Comparing parameters between Series C and PMIO
HPVCHAR, which is used in PM I/O, is not used Series C I/O. PVCHAR are used instead, and only
valid enumerations (depending on the settings for HENABLE and IOM TYPE) are displayed to you.
Some HART parameters are only valid for HART Protocol Version 6. Series C IOMs support HART
6.0 and later version device features such as Extended Device Status, Configuration Change
Counter, Variable Status and Classification Codes. The current release of Series C I/O supports
these HART 6.0 and later version device parameters:
Parameter Tab Description
HMAXDEVVARS Indicates the last device variable code supported by the device.
Information can be used by the host applications.
HNCFGCHG Configuration change counter is a counter maintained by HART 6.0
and later version device which is incremented every time configuration
is changed. This is improvement over the single 'configuration
changed bit' in previous HART releases
HNSMMINPRE Minimum number of preamble bytes to be sent with the response from
device to the IOM. Series C IOMs take advantage of this configuration if
supported by the device to minimize the bytes sent from device in
response messages.
HDYNCC Variables Dynamic / device variable classification code
HDYNST Variables Dynamic / device variable classification code
HSLOTCC Variables Dynamic / device variable classification code
HSLOTST Variables Dynamic / device variable classification code
10.11.12 Parameter values not copied during Block Copy
IOP and CHANNUM are the only configuration parameter values not copied during a Block Copy
operation.
10.12 Defining AI Channel Blocks
The AI channel block represents a single analog input point on either an AI-HART or AI-LLMUX or
AI-LLAI I/O Module. The type of analog input IOM needed is based on the:
l type of field sensor that is providing the input to the channel
l PV characterization options you select (as listed in the table in Determining PV
Characterization)
Shipping Port: China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Related products:
TC-IXL062
TC-KIOL02
TCM4351A
TCM4351B
TC-OAH061
TC-ODD32
TC-ODX161
TCP202A
TC-RPFM01
TCSECE300R2
TCSEK3MR10
TC-TG-F1C3
TC-XXXXX2
The winter solstice is Du 1 of the four solar terms of 20 Bai, and ...
Dec. 18 , 2020Let's first take a look at the literal meaning of the DCS system.
Dec. 24 , 2020