Honeywell SAI-1620M

Field termination assembly module TSAI-1620m is the interface between field 

components (such as sensors) and the safe high-density analog input module 

SAI-1620m in Safety Manager. It can be used for interfacing signals from Class I, 

Division 2 Hazardous Locations.

The TSAI-1620m module has sixteen analog input channels, which may be used 

for both safety-related and non-safety-related applications. These sixteen 

channels (separated into two groups of eight channels with common 0 V) are 

connected via a system interconnection cable (SICC-0001/Lx), which is plugged 

into the SIC connector on the FTA module.

The FTA module has a universal snap-in provision for standard DIN EN rails, and 

screw terminals for connection of power supply, ground and field wiring

Description:

This document contains Honeywell proprietary information. Information 

contained herein is to be used solely for the purpose submitted, and no part of this 

document or its contents shall be reproduced, published, or disclosed to a third 

party without the express permission of Honeywell Safety Management Systems.

While this information is presented in good faith and believed to be accurate, 

Honeywell disclaims the implied warranties of merchantability and fitness for a 

purpose and makes no express warranties except as may be stated in its written 

agreement with and for its customer.

In no event is Honeywell liable to anyone for any direct, special, or consequential 

damages. The information and specifications in this document are subject to 

change without notice.

Specific products described in this document are covered by U.S. Patent Nos. 

D514075, D518003, D508469, D516047, D519470, D518450, D518452, 

D519087 and any foreign patent equivalents.

Copyright 2012 – Honeywell Safety Management Systems, a division of 

Honeywell Aerospace B.V.

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201