HONEYWELL TK-OAV081

The Honeywell IPC-620 adapter chassis is provided with the 

front cover. The cover is hinged so it opens easily to allow 

access to the adapter cards and field wiring connectors. 

The cover can also be easily removed. Angle brackets for 

mounting the chassis in the control cabinet are also provided.

Description:

Emphatec’s MIBRIDGE® offering 

includes an interface system to replace 

Honeywell’s IPC-620 I/O racks. The 

MIBRIDGE® solution includes a chassis 

that replaces the IPC-620 chassis 

(same footprint in the control cabinet), 

adapter cards for 6/8, 16 and 32 

channel I/O cards, and cables.

Field wiring connectors are removed 

from the existing IPC-620 I/O cards and 

re-installed on the MIBRIDGE® adapter 

cards. The adapter card accepts the 

field wiring connectors directly meaning 

there is no need to modify the field 

wiring. This saves time and more 

importantly eliminates the chance of 

wiring errors. A cable interfaces each 

adapter card to the new control system. 

Adapter cards are specific to the 

number of I/O channels on the original 

IPC-620 I/O card, not the type of I/O. 

For example, all 16 channel IPC-620 

I/O cards, regardless of whether they 

are input or output cards, are replaced 

by a common 16 channel adapter card. 

The cable to the new control system 

can be generic (provided with flying 

leads for connection to the new I/O 

card) or specific to the new I/O card 

(provided with a connector specific to 

that I/O card). 

The MIBRIDGE® Honeywell IPC-620 

solution was designed to allow control 

to migrate to Rockwell’s Controllogix 

system although it can be used 

with other platforms as well. The 

Controllogix chassis can be mounted 

directly on the front of the MIBRIDGE®

chassis (see photo).

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201