In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The information and specifications in this document are subject to change without notice.
The R7824C Rectification Flame Amplifier is a solid state plug-in
amplifier that responds to a rectified signal from a C7024E,F SelfCheck Ultraviolet Flame Detector to indicate the presence of
flame when used with an RM7824 Relay Module.
The R7847A,B Rectification Flame Amplifiers are solid state plugin amplifiers that respond to a rectified signal from a rectification
type flame detector to indicate the presence of flame when used
with 7800 SERIES Relay Modules.
The R7847C Self-Check Rectification Flame Amplifier is a solid
state plug-in amplifier that responds to a rectified signal from a
C7012E,F Self-Check Ultraviolet Flame Detector to indicate the
presence of flame when used with 7800 SERIES Relay Modules.
This is not European Community (CE) approved for EC7810,
EC7820, EC/RM7830 or EC/RM7850 Relay Modules.
The R7848A,B Infrared Flame Amplifiers are solid state plug-in
amplifiers that respond to an infrared signal from a C7015
Infrared Flame Detector to indicate the presence of flame when
used with 7800 SERIES Relay Modules.
The R7849A,B Ultraviolet Flame Amplifiers are solid state plug-in
amplifiers that respond to an ultraviolet signal from a C7027,
C7035 or C7044 Ultraviolet Flame Detector to indicate the
presence of flame when used with 7800 SERIES Relay Modules.
The R7851B Optical Flame Amplifiers are solid state plug-in
amplifiers that respond to optical signals from C7927, C7935,
C7915, and C7962 Flame Detectors to indicate the presence of
flame when used with 7800 SERIES Relay Modules.
