INQUIRE NOW
Products Name: 6180P-15BPXP Allen Bradley MicroLogix 1000 Programmable Controllers
PRODUCT DESCRIPTION
Brand: Allen Bradley
Model number:6180P-15BPXP
Colour:new
Warranty: 12 months
Lead Time:3-day working day
Country of origin: USA Price: Please contact us
Product weight:0.11kg
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Description:
If this product is installed within the European Union or EEC regions
and has the CE mark, the following regulations apply.
Note: Declarations of Conformity (DOCs) to European Union
Directives are available on-line at www.ab.com/certification/ce/
docs. The web site is the authoritative source for verifying
compliance and suitability for use of this and other Rockwell
Automation/Allen-Bradley products.
EMC Directive
This unit is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) using a technical construction
file and the following standards, in whole or in part:
• EN 50081-2 EMC - Emission Standard, Part 2 - Industrial
Environment
• EN 50082-2 EMC - Immunity Standard, Part 2 - Industrial
Environment
• EN 61800-3 - Adjustable Speed Electrical Power Drive Systems,
Part 3 - EMC Product Standard including specific test methods
The product described in this manual is intended for use in an
industrial environment.
Meeting CE Requirements
To meet CE requirements the following components are required:
• Install an AC line filter (2090-UXLF-xxx or -HVxxx) between the
AC power source and the drive input, and as close to the drive as
possible (refer to Appendix C for available AC line filters). The
supply must be grounded for the filter to operate properly.
• Connect auxiliary input power (if required) from the load side of
the AC line filter to the drive.
• Use 2090 series motor power and feedback cables and terminate
the motor power cable shields to the chassis clamp provided
(refer to Chapter 3 for wiring instructions).
• When installing the Ultra3000 system inside an enclosure, run
input power wiring (grounded to the enclosure) in conduit
outside of the enclosure.
• Separate signal and power cables as shown in Planning Your
Panel Layout of this chapter.
Publication 2098-IN003E-EN-P — April 2004
Installing Your Ultra3000 1-3
Low Voltage Directive
These units are tested to meet Council Directive 73/23/EEC Low
Voltage Directive. The EN 60204-1 Safety of Machinery-Electrical
Equipment of Machines, Part 1-Specification for General Requirements
standard applies in whole or in part. Additionally, the standard
EN 50178 Electronic Equipment for use in Power Installations applies
in whole or in part.
Refer to Appendix B for interconnect information
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Related products:
20F11ND027AA0NNNNN
2711-T5A2L1
2711PC-T6M20D
1794-IR8
1756-RM2
1794-OB32P
1794-IE12
22B-D2P3N104
1794-OE12
1794-IRT8XT
1783-AENTR
1394C-SJT10-D
The winter solstice is Du 1 of the four solar terms of 20 Bai, and ...
Dec. 18 , 2020Let's first take a look at the literal meaning of the DCS system.
Dec. 24 , 2020