each channel.
protected.
The 3500/42M Proximitor Seismic Monitor:
l Protects machinery by continuously comparing
monitored parameters against configured alarm
setpoints to drive alarms.
l Communicates essential machine information to both
operations and maintenance personnel.
The 3500/42M Proximitor Seismic Monitor is a four-channel
monitor that accepts input from proximity and seismic
transducers. It conditions the signal to provide vibration and
position measurements and compares the conditioned
signals with user-programmable alarms.
You can program each channel using the 3500 Rack
Configuration Software to monitor and report:
l Radial vibration l REBAM
l Thrust position l Acceleration
l Differential
expansion
l Shaft absolute
l Eccentricity l Circular acceptance region
l Velocity
The monitor channels are programmed in pairs and can
perform up to two of the listed functions at a time. For
example, Channels 1 and 2 can perform one function while
channels 3 and 4 perform another or the same function.
Each channel, depending on configuration, typically
conditions its input signal to generate various parameters
called static values. You can configure alert setpoints for
each active static value and danger setpoints for any two of
the active static values.
