The PCI-1200 User Manual is one piece of the documentation set for your
DAQ system. You could have any of several types of manuals, depending
on the hardware and software in your system. Use the manuals you have as
follows:
• Getting Started with SCXI—If you are using SCXI, this is the first
manual you should read. It gives an overview of the SCXI system and
contains the most commonly needed information for the modules,
chassis, and software.
• SCXI Chassis Manual—If you are using SCXI, read this manual for
maintenance information on the chassis and installation instructions.
• SCXI hardware user manuals—If you are using SCXI, read these
manuals next for detailed information about signal connections and
module configuration. They also explain in greater detail how the
module works and contain application hints.
• DAQ hardware user manuals—These manuals have detailed
information about the DAQ hardware that plugs into or is connected
to the computer. Use these manuals for hardware installation and
configuration instructions, specification information about the DAQ
hardware, and application hints.
• Software documentation—Examples of software documentation
you may have are the LabVIEW or LabWindows/CVI documentation
sets and the NI-DAQ documentation. After you set up the
hardware system, use either the application software (LabVIEW or
LabWindows/CVI) or the NI-DAQ documentation to help you write
your application. If you have a large and complicated system, it is
worthwhile to look through the software documentation before you
configure the hardware.
• Accessory installation guides or manuals—If you are using accessory
products, read the terminal block and cable assembly installation
About This Manual
National Instruments Corporation xi NI PCI-1200 User Manual
guides and accessory user manuals. They explain how to physically
connect the relevant pieces of the system. Consult these guides when
making connections.
