396560-01-6 EMERSON

Hereby, Remote Automation Solutions declares that 

the ControlWave Micro product is in compliance with 

the essential requirements and other relevant 

provisions of European Directives 2004/108/EC (EMC) 

and 94/9/EC (ATEX).

Connections made to RS-232 or RS-485 

communications ports shall be mechanically 

secured in place with suitable screw connections 

to prevent loosening or disconnection during use. 

 When using Ethernet connections, the RJ45 

(Ethernet) connection must have a mating 

connector with a valid securing clip to prevent 

loosening or disconnection during use. 

 The USB connector on the IEC 62591 module shall 

not be used unless the area is known to be nonhazardous (non-flammable). 

 Install the ControlWave Micro within a suitable 

certified tool-accessible ATEX or IECEx approved 

IP54 or better enclosure. 

 The area in which the equipment is used should be 

a minimum of Pollution degree 2, as defined by 

IEC 60664-1 (that is, the environment should not 

contain conductive pollution and the equipment 

shall be installed in an indoor or sheltered 

location). 

 The equipment may be used in zone 2 with 

flammable gases. 

 The equipment may be used in the presence of 

flammable gases and vapors with apparatus 

groups IIC or IIB or IIA and with temperature 

classes T1 or T2 or T3 or T4. 

 The equipment is certified for use in ambient 

temperatures in the range of —40C ≤ Tamb ≤ +70C 

and should not be used outside this range. 

 The equipment is to be installed by suitably 

trained personnel in accordance with the

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201