These products MUST be installed outside ATEX zones.
They are qualified for the protection of motors that are protected against explosions
and placed in Zones 1-2 or 21-22.
Use of these products must be limited to the electric motor protection function
for which they are designed.
These products must be installed, used and maintained in accordance with the
standards and regulations applicable within the country of installation, for example:
b directive 99/92/EC
b EN/IEC standards: 60079-14, 60079-17, 61241-14, 60364
b EN standard: 50495
b established practice for installation in the zone or zones for which they have been
designed.
We accept no responsibility in the event of failure to comply with these standards
and regulations.
This product must be installed, configured, started up and maintained by qualified,
authorized personnel.
Responsibility for manufacturer traceability (serial number on the certification
label) is at the first known delivery destination.
These products MUST be used to provide protection against motor overloads:
b for increased safety motors, in the context of standard IEC 60079-7, or
b when required by the EC-type examination certificate of the motor installed in the
ATEX zone
