If a moderate percentage of non-permanent faults is present in a system, two or more shots are justified. If fused ‘tees’ are used and the fault level is low, the timer of the fuses may not discriminate with the main IDMT relay: several shots are usefull. This would not warm up the fuse to a such extent that it would eventually blow before the main protection operated.
Overview
In addition to supporting the ISO 7811 ABA (American Banking
Association) standard the magnetic stripe cards, CyberStation now
provides support for custom ABA access cards. The CyberStation
standard ABA card format only reads one field (the Primary Account
Number or PAN) consisting of 19 digits from the card, which is used to
identify the card number. The custom ABA card format expands that
capability (in addition to the card number) to provide support for:
Site code Issue code Manufacturer code
CyberStation provides the user with an interface to specify the
structure of a custom ABA magnetic stripe card.
Custom ABA Card Rules
In order for CyberStation to support custom ABA cards the following
requirements apply:
Continuum ACX series controllers or CX series controllers
connected to AC-1 Plus Door Access modules must be used.
A door can be configured for ABA Format2 or Custom ABA, but not
both. Only one custom ABA format will be supported at a time.
The default mode for parsing a card is fixed length. Installations
not using fixed length cards must indicate that they are using
variable length structures with a special identifier character (V)
described later in this section.
SCHNEIDER 2704 SCHNEIDER 140CRA93200 SCHNEIDER 170ADM35010 SCHNEIDER BMEH584040C SCHNEIDER HMIGTO4310 SCHNEIDER TM221C24T SCHNEIDER TSXCUSBMBP SCHNEIDER 170ENT11002 SCHNEIDER 140CPU67160S SCHNEIDER 170NEF11021 SCHNEIDER 140cps11420 SCHNEIDER 140aci04000 SCHNEIDER 140aco02000 SCHNEIDER 140NOE77101 SCHNEIDER DAP212 SCHNEIDER LMC101CAA10000
