Large stock, please search or inquiry

Fenoux Electric Co., Ltd.
Home / Products / WoodWard / 8271-468 WOODWARD

8271-468 WOODWARD

Brand:  WoodWard

Model number:8271-468

Colour:new                  

Warranty: 12 months

Lead Time:3-day working day   

Country of origin: USA Price: Please contact us         

Product weight:0.85kg

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

8271-468   WOODWARD

INQUIRE NOW

Products Name: 8271-468 WOODWARD

PRODUCT DESCRIPTION

Do NOT use the minimum-fuel contact as a part of any emergency stop sequence. The emergency may be caused by a governor malfunction which would also cause a malfunction of the minimumfuel feature. Use of the minimum-fuel contact for an emergency stop sequence could cause overspeed of the prime mover and mechanical 

damage and personal injury, including death.

Benefits:

Ballarms (110) 

 Replace the ballarms if the toes have a worn flat that exceeds .030 inch in 

width. 

Ballarm Bearings (111) 

 Replace rough or seized bearings. Replace bearing if measurable wear 

marks were found on pins (106). 

Pilot Valve Plunger (112) 

 The control and compensation land must not have nicks or scratches, and 

sharp corners must be retained. 

Thrust bearing (117) 

 Top and bottom races (116-118). Bearing race (116) must not be worn from 

ballarm toes. The rollers in bearing (117) must be clean and roll freely. 

Floating Lever (125) 

 Inspect for wear where droop pin contacts the lever. Inspect for wear in area 

of contact with the speed setting lever. 

Governor Assembly 

To prepare to assemble the governor, lay the parts in an orderly fashion on a 

clean dry work surface. Lubricate all O-rings with white petroleum jelly to facilitate 

assembly. 

Use only new O-rings, seals, gaskets and cotter pins. Careful, precise assembly 

methods will save time and help to ensure correct calibration of the governor. 

Torque all 1/4 - 20 screws to 90 lb-in (10 Nžm). 

Assembly Procedures 

1. Install O-ring (128) on needle valve (127) and install it in case (26). 

2. Install O-ring (130) on air bleed plug (129) and install it in case (26). 

3. Install stop screws (34). Leave screws (1) on cover plate (35) loose until 

after the governor is calibrated. 

4. Assemble servo piston (103) and link (102). Start double diameter pin (104) 

into the chamfered hole in servo piston (103). Align hole in link (102) with 

pin, and press the pin in. Be sure the pin does not protrude from either side 

of the piston. Install the piston assembly in the case. 

5. Turn case (26) bottom side up. Install retaining ring (99) on limit/shutdown 

pilot valve (100). Install spring (98) on the spring seat of plunger (100) and 

install this assembly in the case (Figure 5-11). 

6. Install one buffer spring (97), buffer piston (101), and second buffer spring 

(97) in the buffer bore of case (26). 

7. Place base gasket (96) on case (26). Install and secure base (95) with 

seven screws (75).


8271-468   WOODWARD

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

image.png

Related products:

9907-018

DSS-2

5464-643

5466-031

5466-253

5466-258

5466-348

5466-353

5501-367

5501-376

5464-658

5466-409

9907-838

9907-014

9905-131

9907-186

9907-414

9907-838

9970-164

5441-413

9905-003

505-4532

8200-224

1247-007

1326-183

1355-169

5210-543

5464-551

8250-565

8290-195

8405-307

8406-113