Brand: WoodWard
Model number:9905-760
Colour:new
Warranty: 12 months
Lead Time:3-day working day
Country of origin: USA Price: Please contact us
Product weight:0.85kg
Shipping Port: China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
9905-760 WOODWARD
INQUIRE NOW
Products Name: 9905-760 WOODWARD
PRODUCT DESCRIPTION
Woodward has launched hardware and software updates to address many CIP requirements; however, complete NERC/CIP compliance involves more than the controls and is dependent on plant infrastructure and procedures. The physical security remains the user’s responsibility.
Benefits:
Set the IDLE potentiometer (pot) (if used) to mid-position.
7. Set the RATED speed pot fully counterclockwise (to minimum speed
setting).
8. Set the GAIN and STABILITY pots to mid-position.
9. Set START FUEL LIMIT clockwise (if applicable).
10. Start the engine or turbine, following manufacturer's instructions.
Be prepared to make an emergency shutdown when starting the
engine, turbine, or other type of prime mover, to protect against
runaway or overspeed with possible personal injury, loss of life, or
property damage.
Verify:
· MPU voltage between terminals 5 and 6 at least 1.5 Vrms while cranking?
(For small gears, it may be necessary to decrease the MPU clearance). Do
not decrease below 0.25 mm (.010 inches).
· Actuator should go to maximum fuel position when the starter turns engine
or turbine. (If applicable, Start Fuel Limit must be fully clockwise.)
· When the engine or turbine starts and comes to speed, the actuator arm
should move toward minimum-fuel position.
11. Adjust the GAIN pot to the stable region between low-frequency and highfrequency oscillation.
12. If there is a low-frequency oscillation which does not stop when the GAIN
pot is adjusted, turn the STABILITY pot slightly clockwise and try the GAIN
pot adjustment again. Continue adjusting the STABILITY pot slightly
clockwise, then readjusting the GAIN pot, until the engine runs at a steady
speed.
If there is a high-frequency oscillation which will not stop, even when the
GAIN pot is fully counterclockwise, adjust the STABILITY pot slightly
counterclockwise until the high-frequency oscillation stops.
Speed Settings
13. Adjust the RATED SPEED pot for the desired rated speed.
14. Set the IDLE SPEED pot for the desired idle speed.
15. Close the IDLE/RATED switch.
16. Adjust transient response. Simulate a transient by manually bumping the
linkage.
To decrease settling time (may increase ringing) after a transient, turn the
GAIN pot clockwise slightly, then turn the STABILITY pot as required to
eliminate oscillation and to obtain desired response. Repeat if necessary
Shipping Port: China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Related products:
9907-018
DSS-2
5464-643
5466-031
5466-253
5466-258
5466-348
5466-353
5501-367
5501-376
5464-658
5466-409
9907-838
9907-014
9905-131
9907-186
9907-414
9907-838
9970-164
5441-413
9905-003
505-4532
8200-224
1247-007
1326-183
1355-169
5210-543
5464-551
8250-565
8290-195
8405-307
8406-113
The winter solstice is Du 1 of the four solar terms of 20 Bai, and ...
Dec. 18 , 2020Let's first take a look at the literal meaning of the DCS system.
Dec. 24 , 2020